High birefringence photonic bandgap fiber with elliptical air holes

In this paper, we proposed a high birefringence photonic bandgap fiber (PBGF) with elliptical air holes in cladding and circular air hole in core. The forbidden gaps of the honeycomb structure are calculated when the circular air holes are deformed to the elliptical shape. And the birefringence of the PBGFs is investigated by using a full-vector finite element method (FEM) and the numerical results are presented.     

Year round test of a solar adsorption ice maker in Kunming,China

A solar adsorption ice maker with activated carbon–methanol adsorption pair was developed for a practical application. Its main features include utilization of a water cooled condenser and removing all valves in the refrigerant circuit except the one that is necessary for refrigerant charging. Year round performance tests of the solar ice maker were performed in Kunming, Yunnan Province, China. Test results show that the COP (coefficient of performance) of the solar ice maker is about 0.083–0.127, and its daily ice production varies within the range of 3.2–6.5 kg/m² under the climatic conditions of daily solar radiation on the surface of the adsorbent bed being about 15–23 MJ/m² and the daily average ambient temperature being within 7.7–21.1 °C. The suitable daily solar radiation under which the solar ice maker can run effectively in Kunming is above 16 MJ/m².     

Continuous Separation of Inclusions from Aluminum Melt Flowing in a Circular Pipe using a High Frequency Magnetic Field

The continuous separation of inclusions from aluminum melt flowing in a circular pipe using a high frequency magneticfield was investigated both theoretically and experimentally The separation efficiency was calculated based on thetrajectory method and compared with experimental results. It is found that the separation efficiency is a functilnondimensional parameters t_i·d_p~2B_e~2/μ_fμ_eα~2 and α/δ.The effective way to improve the separation efficiency is to increasethe effective magnetic flux density and decrease the pipe radius. and the value of α/δ should be kept about 2 in orderto obtain the optimum separation efficiency.     

Deposition and characterization of nanocrystalline diamond films on Co-cemented tungsten carbide inserts

Nanocrystalline diamond films were deposited on Co-cemented tungsten carbides using bias-enhanced hot filament CVD system with a mixture of acetone, H₂ and Ar as the reactant gas. The effect of Ar concentration on the grain size of diamond films and diamond orientation was investigated. Nanocrystalline diamond films were characterized with field emission scan electron microscopy (FE-SEM), Atomic force microscopy (AFM), Raman spectroscopy and X-ray diffraction spectroscopy (XRD). Rockwell C indentation tests were conducted to evaluate the adhesion between diamond films and the substrates. The results demonstrated that when the Ar concentration was 90%, the diamond films exhibited rounded fine grains with an average grain size of approximately 60–80 nm. The Raman spectra showed broadened carbon peaks at 1350 cm^− 1 and 1580 cm^− 1 assigned to D and G bands and an intense broad Raman band near 1140 cm^− 1 attributed to trans-polyacetylene, which confirmed the presence of the nanocrystalline diamond phase. The full width at half maximum of the <111> diamond peak (0.8°) was far broader than that of conventional diamond film (0.28°–0.3°). The Ra and RMS surface roughness of the nanocrystalline diamond film were measured to be approximately 202 nm and 280 nm with 4 mm scanning length, respectively. The Ar concentration in the reactant gases played an important role in the control of grain size and surface roughness of the diamond films. Nanocrystalline diamond-coated cemented tungsten carbides with very smooth surface have excellent characteristics, which made them a promising material for the development of high performance cutting tools and wear resistance components.     

Application of the blind source separation method to feature extraction of machine sound signals

As the result of vibration emission in air, a machine sound signal carries important information about the working condition of machinery. But in practice, the sound signal is typically received with a very low signal-to-noise ratio. To obtain features of the original sound signal, uncorrelated sound signals must be removed and the wavelet coefficients related to fault condition must be retrieved. In this paper, the blind source separation technique is used to recover the wavelet coefficients of a monitored source from complex observed signals. Since in the proposed blind source separation (BSS) algorithms it is generally assumed that the number of sources is known, the Gerschgorin disk estimator method is introduced to determine the number of sound sources before applying the BSS method. This method can estimate the number of sound sources under non-Gaussian and non-white noise conditions. Then, the partial singular value analysis method is used to select these significant observations for BSS analysis. This method ensures that signals are separated with the smallest distortion. Afterwards, the time-frequency separation algorithm, converted to a suitable BSS algorithm for the separation of a non-stationary signal, is introduced. The transfer channel between observations and sources and the wavelet coefficients of the source signals can be blindly identified via this algorithm. The reconstructed wavelet coefficients can be used for diagnosis. Finally, the separation results obtained from the observed signals recorded in a semi-anechoic chamber demonstrate the effectiveness of the presented methods .     

Insulating safety analysis of the hot-line sweeping robot

This paper presents a method of calculating the insulating safety distances for hot-line working robots at high voltage when dielectric is adulterated with conducts. Also, finite element method is adopted to calculate the electric field strength to find whether it is beyond the critical. The above methods have been applied to analyze the insulating safety of the robot for hot-line sweeping post insulators in a 220 KV substation. They have also been testified by experimentations.     

软件组件技术在欧特克产品中的应用

软件组件技术是一些可执行单元,可以通过独立的开发和配置,然后整合到各个独立的软件系统中去,是软件系统内被标识、符合某种标准要求的组成部分。针对欧特克用户对软件使用的新需求,通过对用户工作流程以及产业发展的分析,提出了使用组件技术的解决方案,论述了以软件组件技术为核心的解决方案,在欧特克产品实施中的设计、实现过程。     

企业无线网络架设与安全

通过对当前企业无线网络的需求分析,阐述了无线技术和无线网络的发展历史和过程,结合无线网络在家庭用户和企业间架设的不同特点,提出了针对企业用户的无线网络架设的解决方案,同时也阐明了安全问题的重要性。最后结合某公司无线网络架设实例,论述解决方案的设计、实现过程。